317L Stainless Steel Flanges

Stainless Steel 317L Flanges / ASTM A182 Grade F317L

ISO Certified Stainless Steel 317L Slip On Flanges Manufacturer In India And Check Werkstoff Nr. 1.4449 Blind Flange Chemical Composition/ Mechanical Properties.


The 317L stainless steel consists of molybdenum with low carbon content. It is austenitic steel that provides good corrosion resistance. The Stainless Steel 317L Flanges are available in different dimensions, sizes, and types and can easily be customized according to the client's requirements. We are one of the top manufacturers of SA182 Grade F317L Pipe Flange with specialization in different types of flanges with varied applications in multiple industries.

The Stainless Steel 317L Slip On Flanges is a low carbon version of grade 317 stainless steel flanges. The 317L variant produces a stronger weld compared to the 317 variant. The slip-on flange with 317L stainless steel is used in pipes with low pressure, where there is less chance of leakages. The Werkstoff Nr. 1.4449 Blind Flange looks quite solid and is used for blocking a section of the pipe or nozzle that is not being used. The SS 317L Weld Neck Flange comes with a rim with a series of drilled holes which helps in affixing the flange with another one by using bolts. We also manufacture 317L SS Flat Flange used in low arduous environments like the low-pressure water piping. Our UNS S31700 Socket Weld Flanges are strong enough to be used in small high-pressure pipes without worries or hassles.

Our ASTM A182 F317l Flanges follows the industry standard and known for their excellent quality, safety, and affordability. We have a massive stock of SA182 Grade F317L Pipe Flange which can easily be customized as per the client's requirements.


Stainless Steel 317L Flanges
ASTM A182 F317L Flanges
317L SS Blind/ Slip On Flanges
UNS S31700 Weld Neck Flanges


ASTM A182 Stainless Steel 317L Flange

Table of Content



Chemical Structure Of Stainless Steel 317L Flanges

Grade C Mn Si P S Cr Mo Ni N
Stainless Steel 317 Flanges 0.08 maximum 2 maximum 1.0 maximum 0.045 maximum 0.030 maximum 18 – 20 3.00 - 4.00 11.00 - 15.00 57.845 min
Stainless Steel 317L Flanges 0.035 maximum 2 maximum 1.0 maximum 0.045 maximum 0.030 maximum 18 – 20 3.00 - 4.00 11.00 - 15.00 57.89 min

Mechanical Strength Of ASTM A182 Grade F317L Flange

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Chart Of ASTM A182 F317L Flange And Most Reliable UNS S31700 Weld Neck Flanges Manufacturer In India.


ASTM A182 F317L Equivalent

STANDARD WERKSTOFF NR. UNS JIS EN
Stainless Steel 317 Flanges 1.4449 S31700 SUS 317 -
Stainless Steel 317L Flanges 1.4438 S31703 SUS 317L X2CrNiMo18-15-4

317L Stainless Steel Flanges Pressure Rating Calculator

ASTM A182 Stainless Steel 317L Flanges Pressure And Temperature Ratings
Temperature °F Class 150 As Per ASME B16.5 Class 300 As Per ASME B16.5 Class 400 As Per ASME B16.5 Class 600 As Per ASME B16.5 Class 900 As Per ASME B16.5 Class 1500 As Per ASME B16.5 Class 2500 As Per ASME B16.5
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

SS 317L Large Diameter Flanges Pressure Rating Class/ Dimensions Chart In Millimeter And Well-known Class 150 Stainless Steel 317L Spectacle Blind Flange Manufacturer In India.


Standard Dimensions Of ASTM A182 F317l Flanges

Standard Dimensions Of ASTM A182 F317l Flanges


Normal Pipe Size (NPS) Outside Daimeter (O.D.) Of Flange Thickness Of Flanges Diameter of Raised Face Hub at Base Diameter Lengtd Tdru Hub Bore And Diameter Hub at Bevel Diameter Radius of Fillet Socket Deptd
Weld Neck (WN) SORF (Slip-On) NPT (Threaded) SWRF (Socket) Loose (Lap Joint) SORF (Slip-on) SWRF (Socket) Loose (Lap Joint)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Class 300 SS 317L Weld Neck Flange Dimensions Chart In MM

Class 300 SS 317L Weld Neck Flange Dimensions Chart In MM

Nominal Pipe Size(in.)Class 300
Diameter of
Flange
(in.)		No.
of
Bolts		Diameter of
Bolts
(in.)		Diameter of
Bolt Holes
(in.)		Bolt
Circle
(in.)
1/4 3-3/8 4 1/2 0.62 2-1/4
1/2 3-3/4 4 1/2 0.62 2-5/8
3/4 4-5/8 4 5/8 0.75 3-1/4
1 4-7/8 4 5/8 0.75 3-1/2
1-1/4 5-1/4 4 5/8 0.75 3-7/8
1-1/2 6-1/8 4 3/4 0.88 4-1/2
2 6-1/2 8 5/8 0.75 5
2-1/2 7-1/2 8 3/4 0.88 5-7/8
3 8-1/4 8 3/4 0.88 6-5/8
3-1/2 9 8 3/4 0.88 7-1/4
4 10 8 3/4 0.88 7-7/8
5 11 8 3/4 0.88 9-1/4
6 12-1/2 12 3/4 0.88 10-5/8
8 15 12 7/8 1 13
10 17-1/2 16 1 1.12 15-1/4
12 20-1/2 16 1-1/8 1.25 17-3/4
14 23 20 1-1/8 1.25 20-1/4
16 25-1/2 20 1-1/4 1.38 22-1/2
18 28 24 1-1/4 1.38 24-3/4
20 30-1/2 24 1-1/4 1.38 27
24 36 24 1-1/2 1.62 32

Refer SS 317L Flat Face Flanges Thickness Calculation/ Weight Chart And Manufacturer Of SA182 F317L Orifice Flanges.

SS 317L Flat Flange Thickness Tolerance

Wall Thickness Of Stainless Steel 317L Flanges
Normal Pipe Size (NPS) O.D. (Outside Daimeter) Sch 10 Sch 20 Sch 30 STD Wall Outside Daimeter Sch 40 Sch 60 EXT Hvy Outside Daimeter Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

Stainless Steel 317L Slip On Flanges Weight Chart In KG

NPS (Nominal Pipe Size) SORF (Slip On) NPT (Threaded) SWRF (Socket Weld) Loose (Lap Joint) BLRF (Blind) WRNR (Weld Neck)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
1¼ 3 3 3 3 3 3
1½ 3 3 3 3 4 4
2 5 5 5 5 5 6
2½ 8 8 8 8 7 10
3 9 9 9 9 9 11.5
3½ 11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

View Also ANSI B16.5 SA182 Gr F317L Plate Flanges Bolts & Nuts/ Gasket Size Chart And 317L Stainless Steel Flange Tolerance Formula.

Werkstoff Nr. 1.4449 Blind Flange Bolt Size Chart In MM

150# Flange As Per ANSI B16.5 300# Flange As Per ANSI B16.5 600# Flange As Per ANSI B16.5
Normal Pipe Size # Studs And Bolts Diameter of Studs And Bolts Length Of Studs # Studs And Bolts Diameter of Studs And Bolts Stud Length # Studs And Bolts Diameter of Studs And Bolts Length Of Studs
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 – 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 – 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

 

900# Flange As Per ANSI B16.5 1500# Flange As Per ANSI B16.5 2500# Flange As Per ANSI B16.5
Normal Pipe Size # Studs And Bolts Diameter of Bolts And Studs Stud Length # Studs And Bolts Diameter of Studs And Bolts Length Of Studs # Studs And Bolts Diameter of Studs And Bolts Length Of Studs
1/4 RF RTJ 1/4 RF RTJ 1/4 RF RTJ
1/2 4 0.75 4-1/4 4-1/4 4 0.75 4-1/4 4-1/4 4 0.75 4-3/4 4-3/4
3/4 4 0.75 4-1/2 4-1/2 4 0.75 4-1/2 4-1/2 4 0.75 5 5
1 4 0.88 5 5 4 0.88 5 5 4 0.88 5-1/2 5-1/2
1-1/4 4 0.88 5 5 4 0.88 5 5 4 1.00 6 6
1-1/2 4 1.00 5-1/2 5-1/2 4 1.00 5-1/2 5-1/2 4 1.13 6-3/4 6-3/4
2 8 0.88 5-3/4 5-3/4 8 0.88 5-3/4 5-3/4 8 1.00 7 7
2-1/2 8 1.00 6-1/4 6-1/4 8 1.00 6-1/4 6-1/4 8 1.13 7-3/4 8
3 8 0.88 5-3/4 5-3/4 8 1.13 7 7 8 1.25 8-3/4 9
4 8 1.13 6-3/4 6-3/4 8 1.25 7-3/4 7-3/4 8 1.50 10 10-1/4
5 8 1.25 7-1/2 7-1/2 8 1.50 9-3/4 9-3/4 8 1.75 11-3/4 12-1/4
6 12 1.13 7-1/2 7-3/4 12 1.38 10-1/4 10-1/2 8 2.00 13-1/2 14
8 12 1.38 8-3/4 8-3/4 12 1.63 11-1/2 11-3/4 12 2.00 15 15-1/2
10 16 1.38 9-1/4 9-1/4 12 1.88 13-1/4 13-1/2 12 2.50 19-1/4 20
12 20 1.38 10 10 16 2.00 14-3/4 15-1/4 12 2.75 21-1/4 22
14 20 1.50 10-3/4 11 16 2.25 16 16-3/4 – – – –
16 20 1.63 11-1/4 11-1/2 16 2.50 17-1/2 18-1/2 – – – –
18 20 1.88 12-3/4 13-1/4 16 2.75 19-1/2 20-3/4 – – – –
20 20 2.00 13-3/4 14-1/4 16 3.00 21-1/4 22-1/4 – – – –
24 20 2.50 17-1/4 18 16 3.50 24-1/4 25-1/2 – – – –

UNS S31700 Socket Weld Flanges Ring Gasket Chart

Normal Pipe Size Gasket I.D. (Inside Daimeter)
 Gasket O.D. (Outside Daimeter)
150 LB 300 LB 400 LB 600 LB 900 LB
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

SS 317L Large Diameter Flanges Material Specification

Specification Format Of : Stainless Steel 317L Flanges
Size Details (1/2") To (48")
High Temperature Ratings Above 200° Celsius (400°F) For 150 Class Or Above 400° Celsius (750°F)
Low Temperature Ratings Above -29 ° Celsius (−20°F)
Manufacturer Of Japanese Standards JIS = 5K, 10K, 40K, 16K 20K 30K, 63K
Available Materials Cast Iron, Duplex Steel & Super Duplex Steel, Inconel, Stainless Steel, Wrought Iron, Alloy Steel, Mild Steel, Hastelloy, Carbon Steel, Copper Nickel.
Thickness Chart NPS ≤ 18
Bore Diameter Formula NPS ≤ 10
ASME B16.5 Standards EN1092, UNI, EN-1092, ANSI/ASME B16.5, API7S-43, API605, BS4504, API7S-15, API, ISO, MSS S44, ASME B16.48, AWWA C207, IS 2062, ISO70051, ASME B16.36, DIN, BS1560-3.1, B16.47 Series A & B.
Pressure Test Class 150 To Class 2500
Available Face Type Of Flanges FF, Raised Face, Large Male-Female And Small Male-Female, Lap-Joint Face, RTJ, Large Tongue & Groove And Small Tongue Groove.
Forging Techniques In
  • Machined/ Forged/ Heat Treated
Different Type Forged / Plate/ Threaded
ISO Approved Manufacturer Of Lap Joint, Socket-Weld, Threaded, Weld Neck, Blind, Slip-On
Wide Stockist Nagpur, Hyderabad, Ashburn, Johor Dallas, Khobar, Sharjah, Gurgaon, Istanbul, Paulo, Panipat, Surabaya, Lumpur, Surat, Cairo, Alexandria, Busan, Shah New Bogota, Faridabad, Minh Noida, Riyadh, Dombivli, Chennai, Puchong, Ludhiana, Jamnagar, Hanoi, Abu Bangkok, Kalyan, Thane, London, Secunderabad, Vapi, Hazira, Ho Nashik, Dhabi, Tehran, Coimbatore, Milan, Quezon Hangzhou, Dubai, Delhi, Pimpri-Chinchwad, Indore, City, Ambernath, Al Alam, Kota, Batam, Tau, Sao Seoul, Dhaka, Vasai Bahru, Kolkata, Singapore, Beijing, Sydney, Mexico Brisbane, Dammam, Ankleshwar, City, Houston, Guwahati, Ghaziabad, City, Perth, Kuala Visakhapatnam, Bengaluru, Santiago, Al Lucknow, Amsterdam, Chi Madrid, Paris, Chicago, Delhi, Vadodara, Zhengzhou, Jakarta, Pune, Calgary, Chandigarh, Oyama, Karachi, Jeddah, Mysuru, Melbourne, Bhopal, Baku, Patna, Ajman, Kochi, Bhubaneswar, Jaipur, Mumbai, Doha, Raipur, Jubail, Jamshedpur, Navi Rajkot, Shanghai, Tiruchirappalli, Manama, Virar, Agra, Vung Mumbai, Lagos, Ahmedabad
Application For Use Oil And Gas Industry
Municipal Pipe Systems
Food Processing And Manufacturing
Fossil Fuel Power Plants
Waterworks Systems
Nuclear Power Application
Power Plants Industry

A182 Gr F317L Pipe Flange Size Chart

Normal Sizes In inchDimensionStainless Steel 317L Flanges Dimensional Sizes 1/2 inch. to 2 1/2 inch.
Class 125
Class 150 		Class 300Class 400Class 600Class 900Class 1500Class 2500
inch.mminch.millimeterinch.mminch.mminch.mminch.mminchmm
1/2A3 1/288.93 3/495.23 3/495.23 3/495.24 3/41214 3/41215 1/4133.4
b7/1611.19/1614.39/1614.39/1614.37/822.27/822.21 3/1630.2
D21 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.9
D12 3/860.32 5/866.72 5/866.72 5/866.73 1/482.63 1/482.63 1/288.9
n44444444444-444
d5/815.95/815.95/815.95/815.97/822.27/822.27/822.2
3/4A3 7/898.44 5/8117.54 5/8117.54 5/8117.55 1/81305 1/81305 1/2139.7
b1/212.75/815.95/815.95/815.9125.4125.41 1/431.8
D21 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.9
D12 3/469.83 1/482.53 1/482.53 1/482.53 1/288.93 1/288.93 3/495.2
n44444444444-444
d5/815.93/4193/4193/4197/822.27/822.27/822.2
1A4 1/41084 7/8123.84 7/8123.84 7/8123.85 7/8149.25 7/8149.26 1/4159
b9/1614.311/1617.511/1617.511/1617.51 1/828.61 1/828.61 3/834.9
D2250.8250.8250.8250.8250.8250.8250.8
D13 1/879.43 1/288.93 1/288.93 1/288.9410241024 1/4108
n44444444444444
d5/815.93/4193/4193/419125.4125.4125.4
1 1/4A4 5/8117.55 1/4133.45 1/4133.45 1/4133.46 1/41596 1/41597 1/4184.2
b5/815.93/41913/1620.613/1620.61 1/828.61 1/828.61 1/238.1
D22 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.5
D13 1/288.93 7/898.43 7/898.43 7/898.44 3/81114 3/81115 1/8130
n44444444444444
d5/815.93/4193/4193/419125.4125.41 1/828.6
1 1/2A51276 1/8155.66 1/8155.66 1/8155.67177.87177.88203
b11/1617.513/1620.67/822.27/822.21 1/431.81 1/431.81 3/444.5
D22 7/873 982 7/8732 7/8732 7/8732 7/8732 7/8732 7/873
D13 7/844 1/21144 1/21144 1/21144 7/81244 7/81245 3/4146
n44444444444444
d5/8. 15.97/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8
2A6152.46 1/2165.16 1/2165.16 1/2165.18 1/2215.98 1/2215.99 1/4234.9
b3/4197/822.2125.4125.41 1/238.11 1/238.1250.8
D23 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.1
D14 3/41215127512751276 1/2165.16 1/2165.16 3/4171
n44888888888888
d3/4193/4193/4193/419125.4125.41 1/828.6
2 1/2A7177.87 1/2190.57 1/2190.57 1/2190.59 5/82449 5/824410 1/2266.7
b7/822.2125.41 1/828.61 1/828.61 5/841.31 5/841.32 1/457.2
D24 1/8104.84 1/8104.84 1/8104.84 1/8104.84 1/81054 1/81054 1/8105
D15 1/2139.75 7/8149.25 7/8149.25 7/8149.27 1/2190.57 1/2190.57 3/4197
n44888888888888
d3/4197/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8

Torque Chart Of 317L SS Plate Flanges

Size in Inches Size in Millimeter Imperfections Max. Radial Projection
No Deeper Than the Bottom of the Serrations, millimeter Deeper Than the Bottom of the Serrations, millimeter
1/2 15 3.0 1.5
3/4 20 3.0 1.5
1 25 3.0 1.5
1 1/4 32 3.0 1.5
1 1/2 40 3.0 1.5
2 50 3.0 1.5
2 1/2 65 3.0 1.5
3 80 4.5 1.5
3 1/2 90 6.0 3.0
4 100 6.0 3.0
5 125 6.0 3.0
6 150 6.0 3.0
8 200 8.0 4.5
10 250 8.0 4.5
12 300 8.0 4.5
14 350 8.0 4.5
16 400 10.0 4.5
18 450 12.0 6.0
20 500 12.0 6.0
24 600 12.0 6.0

A182 Grade F317L Orifice Flanges Tolerances Chart

Stainless Steel 317L FlangesTolerance Table
A O.D. (Outside Diameter)
  • When O.D. (Outside Diameter) is 24" or less: ±1/16" (1.6 millimeter)
  • When O.D. (Outside Diameter) is over 24": ±1/8" (3.2 millimeter)
D Inside Diameter (I.D.)
  • 10" and smaller: ±1/32" (0.8 mm)
  • 12" thru 18": +1/8" (3.2 mm)
  • 20" and larger: -1/16" (1.6 mm)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 mm)
  • 1/4" RF (Raised Face), T/G (Tongue & Groove), (male & female), (m/f): ±1/64" (0.4 millimeter)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm)
  • 6" and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
P Drilling
  • Circle Bolts: ±1/16" (1.6 mm)
  • Bolts hole spacing: ±1/32" (0.8 mm)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 mm) maximum
  • 3" and larger ±1/16" (1.6 mm) maximum
C Thickness
  • 18" and smaller: ±1/8" (3.2 mm), -0"
  • 20" and larger: ±3/16" (4.8 mm), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 mm)
  • 12" and larger: ±1/8" (3.2 mm)

Held Wide Stock Of Type Of Stainless Steel 317L Flanges

ASTM A182 Stainless Steel F317L Threaded Flange
ASTM A182 Stainless Steel F317L Threaded Flanges
ASTM A182 F317L Lap Joint Flange
ASTM A182 F317L Lap Joint Flanges
SS 317L Pipe Long Weld Neck Flanges
SS 317L Pipe Long Weld Neck Flanges
317L Stainless Steel Spectacle Blind Flange
317L Stainless Steel Spectacle Blind Flanges
UNS S31703 Slip On Flange
UNS S31703 Slip On Flanges
Werkstoff No. 1.4438 Socket Weld Flange
Werkstoff No. 1.4438 Socket Weld Flanges
A182 F317L Blind Flange
A182 F317L Blind Flanges
Steel A182 F317L Weld Neck Flange
Steel A182 F317L Weld Neck Flanges
ASME SA182 F317L Spade Flange
ASME SA182 F317L Spade Flanges
A182-F304 SUS F317L Flange Ring Spacer
A182-F304 SUS F317L Flange Ring Spacer
SA182 Gr F317L Nipo Flange
SA182 Gr F317L Nipo Flanges
Grade 317L SS Weldo Flange
Grade 317L SS Weldo Flanges


We Supplied A Comprehensive Range Of Stainless Steel 317L Flanges To The Following Countries

ASME B16.5, FF, 4 Inch, ASTM A182 Grade F317L Flanges South Africa, Singapore, Bahrain
Sch 40, EN 1092-1, Class 300, RF, 6 Inch, Stainless Steel 317L Slip On Flanges Thailand, Europe, France, Qatar
Class 600, 8 Inch, Stainless Steel F317L Threaded Flanges Nigeria, Australia, Philippines, UK
2 inch, DN 15, ASTM A182 F317L Lap Joint Flanges Malaysia, Hong Kong, Oman, UAE
1500 LB, FF, ASME B16.5, 8 Inch, SS 317L Long Weld Neck Flanges Malaysia, USA, Finland, Bangladesh
SCH100, 10 Inch, Class 300, 317L Stainless Steel Spectacle Blind Flanges Iran, Chile, Italy, Singapore
14 Inch, SCH 100, 2500LB, ASME B16.5, UNS S31703 Slip On Flanges Norway, Malaysia, United Arab Emirates (UAE), Turkey
PN 50, DN 100, ANSI B16.5, RF, Werkstoff No. 1.4438 Socket Weld Flanges Indonesia, Belgium, Dammam -KSA, Philippines.
20 Inch, 300#, EN 10204-1, A182 F317L Blind Flanges Singapore, Malaysia, Canada, Philippines
SCH 110, 22 Inch, Class 900, Steel A182 F317L Weld Neck Flanges Spain, UK, Egypt, Mexico
Class 600, Forged, 26 Inch, ASME SA182 F317L Spade Flanges Poland, Canada, Ellington -United States, UK
RF, 900#, 12 Inch, A182-F304 SUS F317L Flange Ring Spacer Europe, UAE, United Kingdom -UK, Malaysia
SCH 120, 2 Inch, Class 150#, SA182 Gr F317L Nipo Flanges Europe, Romania, Japan, Malaysia
SCH130, BS 10, 6 Inch, Grade 317L SS Weldo Flanges Czechia, Malaysia, Germany, Thailand
10 Inch, SCH 60, Class 300, RF, Stainless Steel 317 RTJ Flanges Thailand, Europe, France, Qatar
22 Inch, ANSI B16.5, SCH 70, Class 2500, SS 317 Slip on Flanges Norway, Malaysia, United Arab Emirates (UAE), Turkey
RF, DN 100, B16.5, PN 50, 317L SS Ring Type Joint Flanges Indonesia, Belgium, Dammam -KSA, Philippines.
24 Inch, 300#, BS EN 10204-1, SS 317L Blind Flanges Singapore, Malaysia, Canada, Philippines
150#, SCH 80, 24 Inch, Stainless Steel 317 Plate Flanges Europe, Romania, Japan, Malaysia