uns s32750 super duplex flanges

UNS S32750 Flanges

Best Deals On Bulk Procurement Of Super Duplex Steel S32750 Blind And SAE S32750 Slip On Flanges For Piping Connection In India.

The UNS S32750 standard consists of microstructures that have 50/50 austenite and ferrite in the Flanges. One of the highlighted features of  UNS S32750 Flanges is that they are highly resistant to different types of corrosion, which helps them to work under several critical environments. The higher molybdenum and chromium content of Super Duplex UNS S32750 Plate Flanges gives it the ability to resist corrosion in an enhanced manner. The Super Duplex 2507 S32750 Blind Flanges have greater resistance against pitting and crevice corrosion than a standard duplex or austenitic steel. In addition, the S32750 Super Duplex Blind Flange comes with a high-impact strength at sub-zero temperature. ASTM A182 Gr F53 Slip On Flange also comes with superior mechanical properties like high strength and low-temperature toughness.

We are one of the biggest manufacturers of various types of 2507 Super Duplex S32750 Weld Neck Flanges in India. Our products are high in quality and are trusted to be used in different industries. Our UNS S32750 Flat Face Flanges go through several tests to ensure their quality and safety standards. We strictly adhere to the deadlines and deliver products within the given time, following the standard shipping methods, unless otherwise specified by our esteemed clients.


UNS S32750 Flanges
UNS S32750 Flanges

UNS S32750 Flanges

SAE S32750 Slip On Flanges
SAE S32750 Slip On Flanges

SAE S32750 Slip On Flanges

Alloy S32750 Blind Flanges
Alloy S32750 Blind Flanges

Alloy S32750 Blind Flanges

SDSS 1.4410 Weld Neck Flanges
SDSS 1.4410 Weld Neck Flanges

SDSS 1.4410 Weld Neck Flanges

Super Duplex S32750 Socket Weld Flanges
Super Duplex S32750 Socket Weld Flanges

Super Duplex S32750 Socket Weld Flanges

Super Duplex UNS S32750 Spectacle Blind Flange
Super Duplex UNS S32750 Spectacle Blind Flange

Super Duplex UNS S32750 Spectacle Blind Flange



uns s32750 flanges manufacturer

Table of Content



PDO Approved Of S32750 Super Duplex Flanges Manufacturer In India And Refer SDSS 1.4410 Weld Neck Flanges Bolt Size Chart In Mm.


UNS S32750 Flanges Bolt & Stud Chart

150# Flange As Per ANSI B16.5 300# Flange As Per ANSI B16.5 600# Flange As Per ANSI B16.5
Normal Pipe Size # Studs And Bolts Diameter of Studs And Bolts Length Of Studs # Studs And Bolts Diameter of Studs And Bolts Stud Length # Studs And Bolts Diameter of Studs And Bolts Length Of Studs
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 – 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 – 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

 

900# Flange As Per ANSI B16.5 1500# Flange As Per ANSI B16.5 2500# Flange As Per ANSI B16.5
Normal Pipe Size # Studs And Bolts Diameter of Bolts And Studs Stud Length # Studs And Bolts Diameter of Studs And Bolts Length Of Studs # Studs And Bolts Diameter of Studs And Bolts Length Of Studs
1/4 RF RTJ 1/4 RF RTJ 1/4 RF RTJ
1/2 4 0.75 4-1/4 4-1/4 4 0.75 4-1/4 4-1/4 4 0.75 4-3/4 4-3/4
3/4 4 0.75 4-1/2 4-1/2 4 0.75 4-1/2 4-1/2 4 0.75 5 5
1 4 0.88 5 5 4 0.88 5 5 4 0.88 5-1/2 5-1/2
1-1/4 4 0.88 5 5 4 0.88 5 5 4 1.00 6 6
1-1/2 4 1.00 5-1/2 5-1/2 4 1.00 5-1/2 5-1/2 4 1.13 6-3/4 6-3/4
2 8 0.88 5-3/4 5-3/4 8 0.88 5-3/4 5-3/4 8 1.00 7 7
2-1/2 8 1.00 6-1/4 6-1/4 8 1.00 6-1/4 6-1/4 8 1.13 7-3/4 8
3 8 0.88 5-3/4 5-3/4 8 1.13 7 7 8 1.25 8-3/4 9
4 8 1.13 6-3/4 6-3/4 8 1.25 7-3/4 7-3/4 8 1.50 10 10-1/4
5 8 1.25 7-1/2 7-1/2 8 1.50 9-3/4 9-3/4 8 1.75 11-3/4 12-1/4
6 12 1.13 7-1/2 7-3/4 12 1.38 10-1/4 10-1/2 8 2.00 13-1/2 14
8 12 1.38 8-3/4 8-3/4 12 1.63 11-1/2 11-3/4 12 2.00 15 15-1/2
10 16 1.38 9-1/4 9-1/4 12 1.88 13-1/4 13-1/2 12 2.50 19-1/4 20
12 20 1.38 10 10 16 2.00 14-3/4 15-1/4 12 2.75 21-1/4 22
14 20 1.50 10-3/4 11 16 2.25 16 16-3/4 – – – –
16 20 1.63 11-1/4 11-1/2 16 2.50 17-1/2 18-1/2 – – – –
18 20 1.88 12-3/4 13-1/4 16 2.75 19-1/2 20-3/4 – – – –
20 20 2.00 13-3/4 14-1/4 16 3.00 21-1/4 22-1/4 – – – –
24 20 2.50 17-1/4 18 16 3.50 24-1/4 25-1/2 – – – –

Check Alloy S32750 Socket Weld Flanges Equivalent Chart And Largest Independent Manufacturer & Stockholder Of Super Duplex UNS S32750 Spectacle Blind Flange.


ASTM A240 UNS S32750 Equivalent

STANDARD WERKSTOFF NR. UNS
Super Duplex UNS S32750 Flanges 1.4410 S32750

View S32750 Super Duplex Orifice Flanges Mechanical Properties/ Thickness Tolerance And Trusted A276 UNS S32750 Raised Face Flanges Manufacturer In India.

Super Duplex S32750 Blind Flange Mechanical Properties

UNS No UNS S32750 Flanges
Grade 2507
Proof Stress 0.2% (MPa) 550
Tensile Strength(MPa) 795
Elongation A5(%) 15
Hardness Max HB - 310 / HRB - 32*


SAE S32750 Slip On Flanges Thickness Calculation For Pressure Vessel

Wall Thickness Of UNS S32750 Flanges
Normal Pipe Size (NPS) O.D. (Outside Daimeter) Sch 10 Sch 20 Sch 30 STD Wall Outside Daimeter Sch 40 Sch 60 EXT Hvy Outside Daimeter Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

ASME SA 276 S32750 Reducing Flanges Chemical Properties/ Pressure Rating Chart And Manufacturer Of ASTM A276 UNS S32750 Flat Face Flanges In India.

Super Duplex UNS S32750 Chemical Composition

UNS No UNS S32750 Flanges
Grade 2507
P 0.035
Other Cu:0.50
S 0.020
Cr 24.0 / 26.0
C 0.030
Si 0.80
Mn 1.20
Mo 3.0 / 5.0
Ni 6.00 / 8.00
N 0.24 / 0.32

S32750 Super Duplex Flanges Pressure Rating Formula

UNS S32750 Flanges Pressure And Temperature Ratings
Temperature °F Class 150 As Per ASME B16.5 Class 300 As Per ASME B16.5 Class 400 As Per ASME B16.5 Class 600 As Per ASME B16.5 Class 900 As Per ASME B16.5 Class 1500 As Per ASME B16.5 Class 2500 As Per ASME B16.5
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

UNS S32750 Specification

Standard Specification Of : UNS S32750 Flanges
Check Size 1/2 Inch. To 48 Inch.
Top Three Format Of Flanges Threaded / Plate/ Forged
Most Famous Type Of Flange Blind, Slip-On, Threaded, Weld Neck, Socket-Weld, Lap Joint
Buy Flanges For Different Propose Municipal Pipe Systems
Power Plants Industry
Waterworks Systems
Food Processing And Manufacturing
Fossil Fuel Power Plants
Nuclear Power Application
Oil And Gas Industry
Check High Temperature Service Above 200° Celsius (400°F) For 150 Class Or Above 400° Celsius (750°F)
Bore Diameter Size NPS (Normal Pipe Size) ≤ 10
EIL Approved Manufacturer Of Standards MSS S44, ASME B16.48, API7S-43, API605, BS4504, API7S-15, IS 2062, ISO70051, API, ISO, EN1092, UNI, EN-1092, ANSI/ASME B16.5, AWWA C207, B16.47 Series A & B, ASME B16.36, DIN, BS1560-3.1.
Buy JIS Standards For Low Price 5K, 10K, 40K, 16K 20K 30K, 63K
Steel Materials For Making Flanges Inconel, Copper Nickel, Alloy Steel, Mild Steel, Stainless Steel, Wrought Iron, Carbon Steel, Duplex Steel & Super Duplex Steel, Cast Iron, Hastelloy
Thickness Details NPS ≤ 18
Available Pressure 150# To 2500#
Important Face Type Large Tongue & Groove And Small Tongue Groove, Large Male-Female And Small Male-Female, Raised Face, Lap-Joint Face, FF, RTJ.
Find Our Stockholder Mumbai, Jakarta, Batam, Sharjah, Chicago, Tiruchirappalli, Quezon Perth, Amsterdam, Istanbul, Ghaziabad, Chandigarh, Jubail, Mysuru, London, Visakhapatnam, Rajkot, Paris, Calgary, Kuala Dhaka, Bahru, Doha, Surabaya, Manama, Dhabi, Jamshedpur, Chennai, Paulo, Surat, Ludhiana, New Lumpur, Jamnagar, Chi Ankleshwar, Busan, Karachi, Kalyan, Khobar, Vung Vapi, Oyama, Brisbane, Delhi, Shah Madrid, Pune, Al Gurgaon, Kolkata, Santiago, Sao Hanoi, Mumbai, Faridabad, Abu Lagos, Bogota, Hazira, City, Sydney, Jeddah, Baku, Dubai, Delhi, Dammam, Panipat, Indore, Pimpri-Chinchwad, City, Minh Bangkok, Bhubaneswar, Beijing, Bhopal, Thane, Seoul, Tau, Shanghai, Guwahati, Coimbatore, Kota, Vadodara, Raipur, Puchong, Patna, Melbourne, Lucknow, Alexandria, Kochi, Al Tehran, Milan, Cairo, Singapore, Vasai Dombivli, Ambernath, Noida, Mexico Johor Houston, Virar, Riyadh, Navi Hangzhou, Ashburn, Nashik, City, Ho Zhengzhou, Nagpur, Ahmedabad, Hyderabad, Bengaluru, Agra, Secunderabad, Dallas, Ajman, Alam, Jaipur
Forging Flange Techniques
  • Machined / Forged/ Heat Treated
Low Temperature Service Above -29 ° Celsius (−20°F)

SDSS 1.4410 Weld Neck Flanges Dimensions with Tolerances

SDSS 1.4410 Weld Neck Flanges Dimensions with Tolerances


Normal Pipe Size (NPS) Outside Daimeter (O.D.) Of Flange Thickness Of Flanges Diameter of Raised Face Hub at Base Diameter Lengtd Tdru Hub Bore And Diameter Hub at Bevel Diameter Radius of Fillet Socket Deptd
Weld Neck (WN) SORF (Slip-On) NPT (Threaded) SWRF (Socket) Loose (Lap Joint) SORF (Slip-on) SWRF (Socket) Loose (Lap Joint)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Size Chart Of Alloy S32750 Socket Weld Flanges

Normal Sizes In inchDimensionUNS S32750 Flanges Dimensional Sizes 1/2 inch. to 2 1/2 inch.
Class 125
Class 150 		Class 300Class 400Class 600Class 900Class 1500Class 2500
inch.mminch.millimeterinch.mminch.mminch.mminch.mminchmm
1/2A3 1/288.93 3/495.23 3/495.23 3/495.24 3/41214 3/41215 1/4133.4
b7/1611.19/1614.39/1614.39/1614.37/822.27/822.21 3/1630.2
D21 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.9
D12 3/860.32 5/866.72 5/866.72 5/866.73 1/482.63 1/482.63 1/288.9
n44444444444-444
d5/815.95/815.95/815.95/815.97/822.27/822.27/822.2
3/4A3 7/898.44 5/8117.54 5/8117.54 5/8117.55 1/81305 1/81305 1/2139.7
b1/212.75/815.95/815.95/815.9125.4125.41 1/431.8
D21 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.9
D12 3/469.83 1/482.53 1/482.53 1/482.53 1/288.93 1/288.93 3/495.2
n44444444444-444
d5/815.93/4193/4193/4197/822.27/822.27/822.2
1A4 1/41084 7/8123.84 7/8123.84 7/8123.85 7/8149.25 7/8149.26 1/4159
b9/1614.311/1617.511/1617.511/1617.51 1/828.61 1/828.61 3/834.9
D2250.8250.8250.8250.8250.8250.8250.8
D13 1/879.43 1/288.93 1/288.93 1/288.9410241024 1/4108
n44444444444444
d5/815.93/4193/4193/419125.4125.4125.4
1 1/4A4 5/8117.55 1/4133.45 1/4133.45 1/4133.46 1/41596 1/41597 1/4184.2
b5/815.93/41913/1620.613/1620.61 1/828.61 1/828.61 1/238.1
D22 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.5
D13 1/288.93 7/898.43 7/898.43 7/898.44 3/81114 3/81115 1/8130
n44444444444444
d5/815.93/4193/4193/419125.4125.41 1/828.6
1 1/2A51276 1/8155.66 1/8155.66 1/8155.67177.87177.88203
b11/1617.513/1620.67/822.27/822.21 1/431.81 1/431.81 3/444.5
D22 7/873 982 7/8732 7/8732 7/8732 7/8732 7/8732 7/873
D13 7/844 1/21144 1/21144 1/21144 7/81244 7/81245 3/4146
n44444444444444
d5/8. 15.97/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8
2A6152.46 1/2165.16 1/2165.16 1/2165.18 1/2215.98 1/2215.99 1/4234.9
b3/4197/822.2125.4125.41 1/238.11 1/238.1250.8
D23 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.1
D14 3/41215127512751276 1/2165.16 1/2165.16 3/4171
n44888888888888
d3/4193/4193/4193/419125.4125.41 1/828.6
2 1/2A7177.87 1/2190.57 1/2190.57 1/2190.59 5/82449 5/824410 1/2266.7
b7/822.2125.41 1/828.61 1/828.61 5/841.31 5/841.32 1/457.2
D24 1/8104.84 1/8104.84 1/8104.84 1/8104.84 1/81054 1/81054 1/8105
D15 1/2139.75 7/8149.25 7/8149.25 7/8149.27 1/2190.57 1/2190.57 3/4197
n44888888888888
d3/4197/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8

Super Duplex UNS S32750 Spectacle Blind Flange Minimum Weight

NPS (Nominal Pipe Size) SORF (Slip On) NPT (Threaded) SWRF (Socket Weld) Loose (Lap Joint) BLRF (Blind) WRNR (Weld Neck)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
1¼ 3 3 3 3 3 3
1½ 3 3 3 3 4 4
2 5 5 5 5 5 6
2½ 8 8 8 8 7 10
3 9 9 9 9 9 11.5
3½ 11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

S32750 Super Duplex Orifice Flanges Tolerance Table

UNS S32750 FlangesTolerance Table
A O.D. (Outside Diameter)
  • When O.D. (Outside Diameter) is 24" or less: ±1/16" (1.6 millimeter)
  • When O.D. (Outside Diameter) is over 24": ±1/8" (3.2 millimeter)
D Inside Diameter (I.D.)
  • 10" and smaller: ±1/32" (0.8 mm)
  • 12" thru 18": +1/8" (3.2 mm)
  • 20" and larger: -1/16" (1.6 mm)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 mm)
  • 1/4" RF (Raised Face), T/G (Tongue & Groove), (male & female), (m/f): ±1/64" (0.4 millimeter)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm)
  • 6" and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
P Drilling
  • Circle Bolts: ±1/16" (1.6 mm)
  • Bolts hole spacing: ±1/32" (0.8 mm)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 mm) maximum
  • 3" and larger ±1/16" (1.6 mm) maximum
C Thickness
  • 18" and smaller: ±1/8" (3.2 mm), -0"
  • 20" and larger: ±3/16" (4.8 mm), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 mm)
  • 12" and larger: ±1/8" (3.2 mm)

ASME SA 276 S32750 Reducing Flanges Gasket Size Chart

Normal Pipe Size Gasket I.D. (Inside Daimeter)
 Gasket O.D. (Outside Daimeter)
150 LB 300 LB 400 LB 600 LB 900 LB
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

Accept All Small And Large Orders Types Of UNS S32750 Flanges In Mumbai, India

UNS S32750 Blind Flanges
UNS S32750 Blind Flanges
Super Duplex S32750 Weld Weld Flange
Super Duplex S32750 Weld Flange
SAE S32750 Slip On Flanges
SAE S32750 Slip On Flanges
S32750 Super Duplex RTJ Flanges
S32750 Super Duplex RTJ Flanges
SDSS 1.4410 Spectacle Blind Flanges
SDSS 1.4410 Spectacle Blind Flanges
Alloy S32750 Socket Weld Flange
Alloy S32750 Socket Weld Flange
ASTM A276 S32750 Orifice Flanges
ASTM A276 S32750 Orifice Flanges
ASTM A82 F63 Reducing Flanges
ASTM A82 F63 Reducing Flanges


We Supplied A Comprehensive Range Of UNS S32750 Flanges To The Following Countries

ASME B16.5, 10 Inch, SCH 60, Super Duplex S32750 Blind Flanges Japan, Europe, Malaysia, Romania
6 Inch, SCH 20, SAE S32750 Slip On Flanges Malaysia, Germany, Czechia, Thailand
3 Inch, ASME B16.5, SCH 50, S32750 Super Duplex Flanges China, Colombia, Sweden, Malaysia
16 Inch, SCH 80, DN350, SDSS 1.4410 Weld Neck Flanges Italy, Iran, Chile, Singapore
24 Inch, SCH 100, Alloy S32750 Socket Weld Flanges Malaysia, United Arab Emirates (UAE), Norway, Turkey
10 Inch, FF, Class 600, Super Duplex UNS S32750 Spectacle Blind Flange Belgium, Dammam -KSA, Indonesia, Philippines.
ANSI B16.5, SCH 120, 14 Inch, S32750 Super Duplex Orifice Flanges Philippines, Canada, Malaysia, Singapore
SCH STD, 600#, 12 Inch, A276 UNS S32750 Raised Face Flanges Mexico, Egypt, UK, Spain
8 Inch, SCH 100, ASME SA 276 S32750 Reducing Flanges Canada, Ellington -United States, Poland, UK
SCH 40, 2500#, 4 Inch, UNS S32750 Flat Face Flanges UAE, United Kingdom -UK, Europe, Malaysia
SCH 160S, 2 Inch, UNS S32750 Silp On Flanges Russia, Dubai, Netherlands, Malaysia
SCH 60, 6 Inch, UNS S32750 Pipe Flanges Kuwait, South Africa, Saudi Arabia (KSA), Brazil
SCH 20, 22 Inch, UNS S32750 Lap Joint Flanges South Africa, Bahrain, Singapore
SCH 40S, Class 150, 4 Inch, Super Duplex S32750 Flanges France, Europe, Thailand, Qatar
RF, SCH 20, 10 Inch, Super Duplex S32750 RTJ Flanges Malaysia, Germany, Czechia, Thailand
RF End, Class 150, 12 Inch, S32750 Raised Face Flanges China, Colombia, Sweden, Malaysia
Class 2500, 2 Inch, SCH60, Super Duplex Steel S32750 Flanges Russia, Dubai, Netherlands, Malaysia
DN 100, RF, PN 50, ANSI B16.5, UNS S32750 Lap Joint Flanges Kuwait, South Africa, Saudi Arabia (KSA), Brazil
BS EN 10204, 600#, RF, 8 Inch, ASTM A182 F53 UNS S32750 Flange Philippines, Nigeria, Australia, UK