Standard Specification Of ASTM A403 WP904L Elbow And Well-known ASTM A403 WP 904L Stainless Steel Pipe Fittings Manufacturer In India.
The 904L fittings are to be strictly used under corrosive situations. The accumulation of copper to the grade 904L alloys makes it resistant to corrosion, especially phosphoric, acidic, and sulphuric acid. The Stainless Steel 904L Pipe Fittings are mainly used in the chemical industries, utility scrubber assemblies, etc. One of India’s Largest Manufacturer Of SS 904L Fittings. The ASTM A403 WP 904L Stainless Steel Pipe Fittings is soaring-alloy austenitic steel with low content of carbon. These are available in sizes from ⅛” NB to 48” NB. We specialize in manufacturing SS 904L Welded Fittings, which are available in various sizes, and comes at a lower price than the seamless fittings.
We are one of the top manufacturers and stockists of Stainless Steel 904L Buttweld Fittings. We manufacture the best quality equipment using advanced machinery. Multiple industries use our products all over the country. We specialize in producing different types of pipe fittings, each of which comes with specific uses:
- ● The UNS N08904 Reducing Tee comes in the shape of the alphabet ‘T’, and it is used for providing smooth flow paths with no turbulence or entrapments.
- ● The SS 904L Pipe Reducer helps change the size of a pipe from a large to a small-bore.
- ● The Werkstoff nr. 1.4539 End Cap helps seal the ends of a pipe. They help to waterproof the piping network, along with resisting moisture, chemical, and weather.
UNS N08904 Stub End Chemical Composition/ Mechanical Properties And Manufacturer Of SS 904L Buttweld Fittings .
Chemical Analysis Of Stainless Steel 904L Pipe Fittings
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
Stainless Steel 904L Pipe Fittings | 0.020 maximum | 2.00 maximum | 1.00 maximum | 0.040 maximum | 0.030 maximum | 19.00 – 23.00 | 4.00 – 5.00 maximum | 23.00 – 28.00 | 1.00 – 2.00 |
Mechanical Behavior Of ASTM A403 WP904L Elbow
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.95 g/cm3 | 1350 °C (2550 °F) | Psi – 71000, MPa – 490 | Psi – 32000, MPa – 205 | 35 % |
Manufacturer Of Stainless Steel 904L Fittings At Factory Price In India, Contact Us Today For Buy Werkstoff nr. 1.4539 End Cap.
ASTM A403 WP 904L Stainless Steel Pipe Fittings Specification
Specification Format: | Stainless Steel 904L Pipe Fittings |
Type Of Fittings Connection: | Seamless (SMLS) Fittings, Butt Weld (BW) Fittings, Welded (Weld) Fittings |
KOC Approved Manufacturer Of Dimension Types: | MSS-SP-43 Type A Fittings, MSS-SP-43 Type B Fittings, JIS B2312 Fittings, ASME B16.28 Fittings, JIS B2313 Fittings, ASME B16.9 |
Pressure Test | 150 LBS To 2500 LBS. |
ASTM A403 WP904L Elbow Schedule: | Schedule 5 TO Schedule XXS. |
Size Of Fittings: | Normal Pipe Size 1⁄₂ to NPS 48” |
Metric Standard | NPT Fittings, ISO Fittings, JIS Fittings, DIN Fittings, EN Fittings |
Top Most 9 Types Of Fittings | 4 Wye, Cross, End Cap, Stub End, Elbow, Tee, Reducer Bend, Adapter |
Other Type Of Connection | Clamp End/ Flange / End Bell/ Threaded/ Weld |
Materials Used For Pipe Fittings: | Tantalum, Stainless Steel, Nickel, Inconel, Iron (Ductile/Cast), Carbon Steel, Titanium, Chrome-molybdenum, Cupro-Nickel 90/10 & 70/30, Nickel Alloys, Monel, Hastalloy, Alloy Steel, Brass, Bronze, Copper |
BS 904S13 Reducer Dimensions Chart According to ASME B16.11 And 904L Stainless Steel Fittings Pressure Rating Calculator.
Stainless Steel 904L Buttweld Fittings Dimensions with Tolerances

NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Held Wide Stock Of ASTM A403 WP 904L Stainless Steel Buttweld Elbow/ Tee/ Reducer/ Stub End In India.
SS 904L Pipe Reducer Weight Chart According to ASME B16.9
DN (Normal Pipe Size) For ASME B16.9 |
Schedule 10S |
Schedule 40S |
Schedule 80S | ||||||
Elbow 90 Deg | Elbow 45 Deg | B16.9 Equal Tee |
Elbow 90 Deg | Elbow 45 Deg |
B16.9 Equal Tee | Elbow 90 Deg | Elbow 45 Deg |
B16.9 Equal Tee | |
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
DN (Normal Pipe Sizes) For ASME B16.9 |
Schedule 10S |
Schedule 40S |
Schedule 80S | ||||||
Concentric Pipe Reducer | Eccentric Pipe Reducer | Reducing And Unequal Tee | Concentric Pipe Reducer | Eccentric Pipe Reducer | Reducing And Unequal Tee | Concentric Pipe Reducer | Eccentric Pipe Reducer | Reducing And Unequal Tee | |
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
UNS N08904 Reducing Tee Size Chart
O.D. or I.D. Diameter | Equivalent Decimal | Nominal Diameter | Typical Threads In Inch |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 |
0.540 |
1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 |
1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Class 150 SS 904L Buttweld Fittings Dimensions
NPS (Normal Pipe Size) | (A) Diameter |
(B) Diameter |
Approx. Weight in Kilogram (KG) |
---|---|---|---|
1/8″ | 0.69 | 0.66 | 0.06 |
1/4″ | 0.80 | 0.80 | 0.10 |
3/8″ | 0.94 | 0.97 | 0.15 |
1/2″ | 1.11 | 1.17 | 0.22 |
3/4″ | 1.24 | 1.38 | 0.32 |
1″ | 1.43 | 1.74 | 0.52 |
1-1/4″ | 1.72 | 2.07 | 0.76 |
1-1/2″ | 1.87 | 2.36 | 0.99 |
2″ | 2.25 | 2.86 | 1.49 |
2-1/2″ | 2.68 | 3.57 | 2.78 |
3″ | 3.05 | 4.23 | 4.41 |
4″ | 3.72 | 5.24 | 6.72 |
300 LB Stainless Steel 904L Fittings Dimensions
NPS (Normal Pipe Sizes) | (A) Diameter | (B) Diameter | Approx. Weight in Kilogram (KG) |
---|---|---|---|
1/8″ | 0.62 | 0.65 | 0.08 |
1/4″ | 0.69 | 0.81 | 0.12 |
3/8″ | 0.75 | 0.96 | 0.19 |
1/2″ | 0.87 | 1.16 | 0.25 |
3/4″ | 0.96 | 1.38 | 0.36 |
1″ | 1.11 | 1.74 | 0.58 |
1-1/4″ | 1.28 | 2.07 | 0.85 |
1-1/2″ | 1.38 | 2.36 | 1.12 |
2″ | 1.61 | 2.85 | 1.61 |
2-1/2″ | 1.93 | 3.57 | 2.36 |
3″ | 2.15 | 4.23 | 3.44 |
4″ | 2.58 | 5.24 | 5.42 |
Tolerance Of Werkstoff nr. 1.4539 End Cap
Stainless Steel 904L Pipe Fittings (Grade 304 & 304L/ 316 & 316L/ 310/ 317L/ 347/ 904L) Tolerance | 90 Deg And 45 Deg Elbows And Pipe Tee |
Reducer (Concentric/ Eccentric) & Lap Joint Stub End (Long / Short) |
Pipe End Caps | |||
Normal Pipe Size (NPS) Of ASME B16.9 | O. (Outside) D. (Daimeter) at Bevel |
I. (Inside) D.(Daimeter) at End |
Wall Thickness Of T | Center-to-End Dimension A ,C ,B |
Over-all Length Of H |
Over-all Length Of F |
1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
-0.03 | ||||||
3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.12 | ||||||
20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.19 | ||||||
26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
-0.19 | ||||||
32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
-0.19 |
904L Stainless Steel Fittings Equivalent
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Stainless Steel 904L Pipe Fittings | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
Pressure Rating Class Of SS 904L Fittings
Pressure-Temperature ratings for Stainless Steel 904L Pipe Fittings (psig) | |||||
---|---|---|---|---|---|
Temperature Ratings | Pressure Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Gasket Material Of ASTM A403 WP 904L Stainless Steel Buttweld Elbow
O.D. or I.D. Diameter | Equivalent Decimal | Nominal Diameter | Typical Threads In Inch |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 |
0.540 |
1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 |
1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Accept All Small & Large Orders Type Of Stainless Steel 904L Pipe Fittings

ASTM A403 WP 904L Stainless Steel Buttweld Unequal Tee

SA403 WP 904L SS Reducing Cross

UNS N08904 End Cap

Werkstoff No. 1.4539 Pipe Bend

904L Stainless Steel Elbow

Stainless Steel 904L Tee

SS 904L Pipe Long Stub End

SS 904L Concentric Reducer

904L SS 180 Degree Elbows

Stainless Steel 904L Welded End Cap

904L Stainless Steel Seamless Lateral Tee

ASME SA403 904L Reducer

SA 403 WP 904L U Bend

ASTM A403 WP904L 90 Deg Elbows

EN X1NiCrMoCu25-20-5 Short Radius Elbow
