astm a694 f70 flanges manufacturer in india

ASTM A694 F70 Flanges

High Yield Carbon Steel F70 Slip On Flange Dimensions And Weight Chart According to ASME B16.5.

The ASTM A694 flanges are available in various grades such as F42, F52, F60, F65, and F70. Each of them varies in its chemical composition. The ASTM A694 F70 Flanges are designed according to industrial standards, and they have high strength. The A694 Grade F70 Flanges are widely used in various industries due to their durability and ability to transmit the flow from refineries to the site. The minimum yield strength of these flanges is 70 KSI at 0.2% offset. It means the yield strength of SA 694 F70 Weld Neck Flange is relatively high, which results in these flanges being tough. The ASME SA694 F70 FF Flanges are great for petroleum industries where the pipelines have to bear high-pressure transmission in critical environments.

The Carbon Steel F70 Blind Flange not only helps in the effective transmission of various media, but it is affordable too. Carbon steel uses only two alloys which is much lower when compared to stainless steel or alloy steel grades. Putting together all the properties of High Yield CS F70 Slip On Flanges in terms of performance, strength, and toughness, one can easily understand the reason behind the rising demand for the specified flanges. We have a vast stock of traditional and customized SA694 Gr F70 Socket Weld Flange, and we can supply them according to our client’s requirements.


ASTM A694 F70 Flanges
ASTM A694 F70 Flanges

ASTM A694 F70 Flanges

High Yield F70 Flange
High Yield F70 Flange

High Yield F70 Flange

Carbon Steel F70 Flange
Carbon Steel F70 Flange

Carbon Steel F70 Flange

High Yield F70 Slip On Flange
 High Yield F70 Slip On Flange

High Yield F70 Slip On Flange

ASTM A694 Grade F70 Blind Flange
ASTM A694 Grade F70 Blind Flange

ASTM A694 Grade F70 Blind Flange

Carbon Steel F70 Weld Neck Flange
Carbon Steel F70 Weld Neck Flange

Carbon Steel F70 Weld Neck Flange







High Yield Carbon Steel F70 Slip On Flange Thickness Calculation For Pressure Vessel

Wall Thickness Of ASTM A694 F70 Flanges
Normal Pipe Size (NPS) O.D. (Outside Daimeter) Sch 10 Sch 20 Sch 30 STD Wall Outside Daimeter Sch 40 Sch 60 EXT Hvy Outside Daimeter Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

ASTM A694 Grade F70 Blind Flange Bolt Pattern

150# Flange As Per ANSI B16.5 300# Flange As Per ANSI B16.5 600# Flange As Per ANSI B16.5
Normal Pipe Size # Studs And Bolts Diameter of Studs And Bolts Length Of Studs # Studs And Bolts Diameter of Studs And Bolts Stud Length # Studs And Bolts Diameter of Studs And Bolts Length Of Studs
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

 

900# Flange As Per ANSI B16.5 1500# Flange As Per ANSI B16.5 2500# Flange As Per ANSI B16.5
Normal Pipe Size # Studs And Bolts Diameter of Bolts And Studs Stud Length # Studs And Bolts Diameter of Studs And Bolts Length Of Studs # Studs And Bolts Diameter of Studs And Bolts Length Of Studs
1/4 RF RTJ 1/4 RF RTJ 1/4 RF RTJ
1/2 4 0.75 4-1/4 4-1/4 4 0.75 4-1/4 4-1/4 4 0.75 4-3/4 4-3/4
3/4 4 0.75 4-1/2 4-1/2 4 0.75 4-1/2 4-1/2 4 0.75 5 5
1 4 0.88 5 5 4 0.88 5 5 4 0.88 5-1/2 5-1/2
1-1/4 4 0.88 5 5 4 0.88 5 5 4 1.00 6 6
1-1/2 4 1.00 5-1/2 5-1/2 4 1.00 5-1/2 5-1/2 4 1.13 6-3/4 6-3/4
2 8 0.88 5-3/4 5-3/4 8 0.88 5-3/4 5-3/4 8 1.00 7 7
2-1/2 8 1.00 6-1/4 6-1/4 8 1.00 6-1/4 6-1/4 8 1.13 7-3/4 8
3 8 0.88 5-3/4 5-3/4 8 1.13 7 7 8 1.25 8-3/4 9
4 8 1.13 6-3/4 6-3/4 8 1.25 7-3/4 7-3/4 8 1.50 10 10-1/4
5 8 1.25 7-1/2 7-1/2 8 1.50 9-3/4 9-3/4 8 1.75 11-3/4 12-1/4
6 12 1.13 7-1/2 7-3/4 12 1.38 10-1/4 10-1/2 8 2.00 13-1/2 14
8 12 1.38 8-3/4 8-3/4 12 1.63 11-1/2 11-3/4 12 2.00 15 15-1/2
10 16 1.38 9-1/4 9-1/4 12 1.88 13-1/4 13-1/2 12 2.50 19-1/4 20
12 20 1.38 10 10 16 2.00 14-3/4 15-1/4 12 2.75 21-1/4 22
14 20 1.50 10-3/4 11 16 2.25 16 16-3/4
16 20 1.63 11-1/4 11-1/2 16 2.50 17-1/2 18-1/2
18 20 1.88 12-3/4 13-1/4 16 2.75 19-1/2 20-3/4
20 20 2.00 13-3/4 14-1/4 16 3.00 21-1/4 22-1/4
24 20 2.50 17-1/4 18 16 3.50 24-1/4 25-1/2

ASME SA694 F70 Flanges Tolerance Chart

ASTM A694 F70 FlangesTolerance Table
A O.D. (Outside Diameter)
  • When O.D. (Outside Diameter) is 24" or less: ±1/16" (1.6 millimeter)
  • When O.D. (Outside Diameter) is over 24": ±1/8" (3.2 millimeter)
D Inside Diameter (I.D.)
  • 10" and smaller: ±1/32" (0.8 mm)
  • 12" thru 18": +1/8" (3.2 mm)
  • 20" and larger: -1/16" (1.6 mm)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 mm)
  • 1/4" RF (Raised Face), T/G (Tongue & Groove), (male & female), (m/f): ±1/64" (0.4 millimeter)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm)
  • 6" and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
P Drilling
  • Circle Bolts: ±1/16" (1.6 mm)
  • Bolts hole spacing: ±1/32" (0.8 mm)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 mm) maximum
  • 3" and larger ±1/16" (1.6 mm) maximum
C Thickness
  • 18" and smaller: ±1/8" (3.2 mm), -0"
  • 20" and larger: ±3/16" (4.8 mm), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 mm)
  • 12" and larger: ±1/8" (3.2 mm)

Reliable ASTM A694 Grade F70 Blind Flange Manufacturer In India And ASME SA694 F70 Flanges Pressure Rating Chart.


Carbon Steel F70 Weld Neck Flange Dimensions Chart According to ASME B16.5

Carbon Steel F70 Weld Neck Flange Dimensions Chart According to ASME B16.5


Normal Pipe Size (NPS) Outside Daimeter (O.D.) Of Flange Thickness Of Flanges Diameter of Raised Face Hub at Base Diameter Lengtd Tdru Hub Bore And Diameter Hub at Bevel Diameter Radius of Fillet Socket Deptd
Weld Neck (WN) SORF (Slip-On) NPT (Threaded) SWRF (Socket) Loose (Lap Joint) SORF (Slip-on) SWRF (Socket) Loose (Lap Joint)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Biggest Carbon Steel F70 Weld Neck Flange Supplier & Manufacturer In Mumbai, India And View Equivalent Of A694 F70.


ASTM A694 F70 Flanges Size Chart

Normal Sizes In inchDimensionASTM A694 F70 Flanges Dimensional Sizes 1/2 inch. to 2 1/2 inch.
Class 125
Class 150
Class 300Class 400Class 600Class 900Class 1500Class 2500
inch.mminch.millimeterinch.mminch.mminch.mminch.mminchmm
1/2A3 1/288.93 3/495.23 3/495.23 3/495.24 3/41214 3/41215 1/4133.4
b7/1611.19/1614.39/1614.39/1614.37/822.27/822.21 3/1630.2
D21 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.9
D12 3/860.32 5/866.72 5/866.72 5/866.73 1/482.63 1/482.63 1/288.9
n44444444444-444
d5/815.95/815.95/815.95/815.97/822.27/822.27/822.2
3/4A3 7/898.44 5/8117.54 5/8117.54 5/8117.55 1/81305 1/81305 1/2139.7
b1/212.75/815.95/815.95/815.9125.4125.41 1/431.8
D21 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.9
D12 3/469.83 1/482.53 1/482.53 1/482.53 1/288.93 1/288.93 3/495.2
n44444444444-444
d5/815.93/4193/4193/4197/822.27/822.27/822.2
1A4 1/41084 7/8123.84 7/8123.84 7/8123.85 7/8149.25 7/8149.26 1/4159
b9/1614.311/1617.511/1617.511/1617.51 1/828.61 1/828.61 3/834.9
D2250.8250.8250.8250.8250.8250.8250.8
D13 1/879.43 1/288.93 1/288.93 1/288.9410241024 1/4108
n44444444444444
d5/815.93/4193/4193/419125.4125.4125.4
1 1/4A4 5/8117.55 1/4133.45 1/4133.45 1/4133.46 1/41596 1/41597 1/4184.2
b5/815.93/41913/1620.613/1620.61 1/828.61 1/828.61 1/238.1
D22 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.5
D13 1/288.93 7/898.43 7/898.43 7/898.44 3/81114 3/81115 1/8130
n44444444444444
d5/815.93/4193/4193/419125.4125.41 1/828.6
1 1/2A51276 1/8155.66 1/8155.66 1/8155.67177.87177.88203
b11/1617.513/1620.67/822.27/822.21 1/431.81 1/431.81 3/444.5
D22 7/873 982 7/8732 7/8732 7/8732 7/8732 7/8732 7/873
D13 7/844 1/21144 1/21144 1/21144 7/81244 7/81245 3/4146
n44444444444444
d5/8. 15.97/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8
2A6152.46 1/2165.16 1/2165.16 1/2165.18 1/2215.98 1/2215.99 1/4234.9
b3/4197/822.2125.4125.41 1/238.11 1/238.1250.8
D23 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.1
D14 3/41215127512751276 1/2165.16 1/2165.16 3/4171
n44888888888888
d3/4193/4193/4193/419125.4125.41 1/828.6
2 1/2A7177.87 1/2190.57 1/2190.57 1/2190.59 5/82449 5/824410 1/2266.7
b7/822.2125.41 1/828.61 1/828.61 5/841.31 5/841.32 1/457.2
D24 1/8104.84 1/8104.84 1/8104.84 1/8104.84 1/81054 1/81054 1/8105
D15 1/2139.75 7/8149.25 7/8149.25 7/8149.27 1/2190.57 1/2190.57 3/4197
n44888888888888
d3/4197/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8

A694 F70 Ring Type Joint Flanges Ring Gasket Chart

Normal Pipe Size Gasket I.D. (Inside Daimeter)
Gasket O.D. (Outside Daimeter)
150 LB 300 LB 400 LB 600 LB 900 LB
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

Check ASTM A694 F70 Pipe Flanges Mechanical Properties And Chemical Composition/ Specification.

Torque Values Of SA 694 F70 Carbon Steel Plate Flange

Size in Inches Size in Millimeter Imperfections Max. Radial Projection
No Deeper Than the Bottom of the Serrations, millimeter Deeper Than the Bottom of the Serrations, millimeter
1/2 15 3.0 1.5
3/4 20 3.0 1.5
1 25 3.0 1.5
1 1/4 32 3.0 1.5
1 1/2 40 3.0 1.5
2 50 3.0 1.5
2 1/2 65 3.0 1.5
3 80 4.5 1.5
3 1/2 90 6.0 3.0
4 100 6.0 3.0
5 125 6.0 3.0
6 150 6.0 3.0
8 200 8.0 4.5
10 250 8.0 4.5
12 300 8.0 4.5
14 350 8.0 4.5
16 400 10.0 4.5
18 450 12.0 6.0
20 500 12.0 6.0
24 600 12.0 6.0

Weight Formula Of Carbon Steel F70 Flange

NPS (Nominal Pipe Size) SORF (Slip On) NPT (Threaded) SWRF (Socket Weld) Loose (Lap Joint) BLRF (Blind) WRNR (Weld Neck)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

SA 694 F70 Carbon Steel Plate Flange Temperature

ASTM A694 F70 Flanges Pressure And Temperature Ratings
Temperature °F Class 150 As Per ASME B16.5 Class 300 As Per ASME B16.5 Class 400 As Per ASME B16.5 Class 600 As Per ASME B16.5 Class 900 As Per ASME B16.5 Class 1500 As Per ASME B16.5 Class 2500 As Per ASME B16.5
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

ASTM A694 F70 Ring Type Joint Flanges Thickness Calculation For Pressure Vessel/ Bolt & Stud Chart, Manufacturer Of SA 694 F70 Carbon Steel Plate Flange In India.

ASTM A694 F70 Pipe Flanges Specifications List

Specification Of : ASTM A694 F70 Flanges
JIS Standards 5K, 10K, 40K, 16K 20K 30K, 63K
Size Of Bore Diameter Flange NPS ≤ 10
Standard Dimensions EN-1092, ASME B16.48, API605, BS4504, EN1092, UNI, ISO, API7S-43, ANSI/ASME B16.5, API7S-15, MSS S44, IS 2062, ASME B16.36, DIN, AWWA C207, B16.47 Series A & B, BS1560-3.1, ISO70051, API.
Minimum Pressure 150# To 2500#
Flange Face Type Raised Face, Groove And Small Tongue Groove, RTJ, Flat Face, Large Tongue & Large Male-Female And Small Male-Female, Lap-Joint Face.
Top Six Type Of Flange Threaded, Lap Joint, Socket-Weld, Blind, Slip-On, Weld Neck
Standard Materials Duplex Steel & Super Duplex Steel, Copper Nickel, Wrought Iron, Inconel, Mild Steel, Stainless Steel, Hastelloy, Cast Iron, Alloy Steel, Carbon Steel.
Thickness Length NPS ≤ 18
Size (1/2") To (48")
Manufacturing Process
  • Forged/ Machined/ Heat Treated
Other Type Of Flange Forged/ Plate/ Threaded
Largest Independent Distributors Of Ludhiana, Santiago, Dubai, Jakarta, New-Delhi, Secunderabad, Jaipur, Mexico-City, Puchong, Cairo, Al-Khobar, Bhopal, Bangkok, Johor-Bahru, Batam, Ho-Chi-Minh-City, Hyderabad, Guwahati, Shah-Alam, Pune, Oyama, Nagpur, Madrid, Faridabad, Amsterdam, Lagos, Navi-Mumbai, Brisbane, Chandigarh, Dombivli, Visakhapatnam, Quezon-City, Coimbatore, Mumbai, Melbourne, Nashik, Perth, Patna, Houston, Zhengzhou, Bengaluru, Karachi, Kochi, Kuala Delhi, Hazira, Kolkata, Panipat, Ghaziabad, Abu-Dhabi, Jamnagar, Tiruchirappalli, Surabaya, Noida, Chennai, Sharjah, Shanghai, Ankleshwar, Dallas, Thane, Gurgaon, Kota, Jamshedpur, Riyadh, Rajkot, Baku, Busan, Surat, Vung-Tau, Jeddah, Tehran, Lumpur, Hanoi, London, Mysuru, Lucknow, Dammam, Dhaka, Vasai-Virar, Istanbul, Bhubaneswar, Beijing, Milan, Doha, Kalyan, Manama, Bogota, Sydney, Raipur, Agra, Ambernath, Ajman, Vadodara, Al-Jubail, Vapi, Calgary, Sao-Paulo, Indore, Pimpri-Chinchwad, Alexandria, Hangzhou, Ashburn, Singapore, Paris, Chicago, Ahmedabad, Seoul.
Application Oil And Gas Industry
Power Plants Industry
Food Processing And Manufacturing
Waterworks Systems
Fossil Fuel Power Plants
Nuclear Power Application
Municipal Pipe Systems

A694 F70 Chemical Composition

Grade C Mn P S Si
ASTM A694 F70 Flanges 0.26-0.265 1.60-1.64 0.025-0.030 0.025-0.030 0.15-0.35

A694 F70 Mechanical Properties

Element Tensile Strength Yield Strength (0.2%Offset) Elongation
ASTM A694 F70 Flanges 415 450 20 %

We Are Supplying Type Of ASTM A694 F70 Flanges To More Than 30 Locations Worldwide

 High Yield Carbon Steel F70 Slip On Flange
High Yield Carbon Steel F70 Slip On Flange
ASTM A694 Grade F70 Blind Flange
ASTM A694 Grade F70 Blind Flange
 ASME SA694 F70 Spectacle Blind Flange
ASME SA694 F70 Spectacle Blind Flanges
Carbon Steel F70 Weld Neck Flange
Carbon Steel F70 Weld Neck Flange
ASTM A694 F70 Reducing Flanges
ASTM A694 F70 Reducing Flanges
 ASME SA694 F70 Raised Face Flange
ASME SA694 F70 Raised Face Flange
ASTM A694 F70 Ring Type Joint Flanges
ASTM A694 F70 Ring Type Joint Flanges
SA 694 F70 Carbon Steel Plate Flange
SA 694 F70 Carbon Steel Plate Flange


An Oldest ASTM A694 F70 Flanges Manufacturer In India, Recently Shipped To The Following Countries:

ASME B16.5, 10 Inch, SCH 60, High Yield F70 Flange Japan, Europe, Malaysia, Romania
6 Inch, SCH 20, Carbon Steel F70 Flange Malaysia, Germany, Czechia, Thailand
3 Inch, ASME B16.5, SCH 50, High Yield F70 Slip On Flange China, Colombia, Sweden, Malaysia
ASME B16.5, 8 Inch, Raised Face, ASTM A694 Grade F70 Blind Flange Oman, Malaysia, Hong Kong, UAE
4 Inch, Sch 120, B16.5, Carbon Steel F70 Weld Neck Flange USA, Finland, Malaysia, Bangladesh
16 Inch, SCH 80, DN350, ASME SA694 F70 Spectacle Blind Flanges Italy, Iran, Chile, Singapore
24 Inch, SCH 100, Carbon Steel F70 Weld Neck Flange Malaysia, United Arab Emirates (UAE), Norway, Turkey
10 Inch, FF, Class 600, ASTM A694 F70 Reducing Flanges Belgium, Dammam -KSA, Indonesia, Philippines.
SCH 160S, 2 Inch, ASME SA694 F70 Raised Face Flange Russia, Dubai, Netherlands, Malaysia
SCH 20, 22 Inch, ASTM A694 F70 Ring Type Joint Flanges South Africa, Bahrain, Singapore
SCH 40S, Class 150, 4 Inch, SA 694 F70 Carbon Steel Plate Flange France, Europe, Thailand, Qatar
24 Inch, 900#, RF, BS 3293, Alloy Steel Flanges France, Europe, Thailand, Qatar
RF, SCH 20, 10 Inch, A694 F70 Threaded Flanges Malaysia, Germany, Czechia, Thailand
RF End, Class 150, 12 Inch, Carbon Steel F70 Forged Flanges China, Colombia, Sweden, Malaysia
Class 2500, 2 Inch, SCH60, A694 F70 Pipe Flange Russia, Dubai, Netherlands, Malaysia
DN 100, RF, PN 50, ANSI B16.5, High Yield F70 RTJ Flange Kuwait, South Africa, Saudi Arabia (KSA), Brazil
BS EN 10204, 600#, RF, 8 Inch, Grade A694 F70 Carbon Steel Flanges Philippines, Nigeria, Australia, UK