background

Inconel 600 Flanges

Inconel 600 Flanges

Alloy 600 Flanges Specification

Standards Specification Of : Inconel 600 Flanges
Pressure Rating ANSI 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Production technique
  • Heat treated, Forged and machined
Most common types Threaded / Screwed / Forged / Plate
Japanese Standards 5K, 10 K, 40 K, 16 K 20 K 30 K, 63 K
Manufacturing Shapes RTJ,FF, Raised Face, Lap-Joint Face, Large Tongue & Groove And Small Tongue Groove, Large Male-Female And Small Male-Female
Size Chart 1/2" to 48"
Flanges Standards MSS S44, ISO70051, EN-1092, ANSI/ASME B16.5, B16.47 Series A & B, ASME B16.48, ASME B16.36, DIN, BS1560-3.1, API7S-15, API, ISO, UNI, AWWA C207, IS 2062, EN1092, API7S-43, API605, BS4504

Inconel 600 Blind Flange Equivalent

Standards Inconel 600
UNS N06600
Werkstoff Nr. 2.4816


Alloy 600 WNRF Flange Chemical Composition

Inconel 600  
Ni 72.0 mini.
Fe 6.0-10.0
Cr 14.0-17.0
Cu 0.5 maxi.
C 0.15 maxi.
Mn 1.0 maxi.
S 0.015 maxi.
Si 0.05 maxi.


Alloy 600 Pipe Flange Mechanical Chart

Density 8.47 g/cm3
Melting Point 1413 °C (2580 °F)
Elongation 40 %
Tensile Strength Psi – 95,000 , MPa – 655
Yield Strength (0.2%Offset) Psi – 45,000 , MPa – 310